Minimum recommended hardware and
software requirements
We have two sets of minimum recommended requirements.
Server / Main PC
This will be the main PC for BreakerPRO and the first one installed. The minimum requirements for this are higher because most of the work is completed using this PC.
Client / additional PCs
Any additional licence purchased will be classed as a
client PC. The minimum requirements for these are lower because the data is all stored on the main PC and pulled from there.
Server / Main PC
Client / additional PCs
Operating System
Windows 10 or above
Windows 10 or above
CPU*
Intel Option
AMD equivalent
Core i7 or above AMD Ryzen 7 or above
Core i5 or above AMD Ryzen 5 or above
Memory / Ram
16GB or above
8GB or above
Hard Drive / HDD
256GB Solid State Drive & 1 TB Hard Disk Drive
At least 256GB Hard Drive
External Hard Drive
At least 1TB SSD
N/A
Internet
This must be hardwired to your broadband router. Broadband speeds of 12Mbps or above are recommended
We recommend all PCs to be hardwired to your Broadband router. Broadband speeds of 12Mbps or above are recommended.
*Due to the volume of CPUs on the market it would be impossible to list them all here. These are suggestions only and there will be a number of other similarly performing CPUs. Check with a local IT expert. Desktop PCs are highly recommended for the Server for performance reasons. If you are unsure if your PCs meet these requirements, please contact to discuss.
BreakerPRO also recommends, but not necessary
required in order to function:
Label Printer
This allows for parts to have a label attached with information concerning the part, with a QR code on it, which can be scanned using the Mobile App or BreakerPRO itself with a Barcode Scanner.
Our system works with a Zebra Printer, and we have partnered with a specialist to help you procure the printer recommended for use with BreakerPRO.
Simon Jackson, Managing Director, Spenic Limited, Unit 1, The Laurels, Stone, Berkeley, GL13 9LD, UK